We specialize in Water Towers Industrial Tanks & Logos
High Rise Buildings - Chemical Plants - Factories . Casinos -  Office Structures - Theme Parks
Structural Steel -   Industrial Pipes  - Silos - More

1 - 877-749-5554    pat@greatwesternpainting.com


 
*
Home
Contact

Acrylic Texture
Anti GraffitiArizona
Arizona Tank Painting
Bad Paints & Effects 
Business Friends
California Tank Painting
Casinos
Clarifier Tank Painting
Custom Car Painting
Electrostatic Painting
Factory Painting
Fire Proof Painting
Free Gifts
High Rises
Grain Elavators
Hospital Painting
Ind. Paint Manufactures
Industrial Pipe Painting
Industrial Tanks
Lead Encapsulation
Light Pole Painting
Luminescent Paint
Montana Tank Painting
MSHA Certified
North Dakota Tank
Paint Dealers
Safety  & Fall Program
Sand & Hydro Blasting
Shale Gas Fraking
Shot Blasting
Silo painting
Site Map
Structural Steel Painting
Surge Tank Painting
Tank Painting
Texas Tank Painting
Thermal Painting
Utah Tank Painting
Vinyl Wall Covering
Water Tank Inspections
Water Towers

































 

Conveyer Danger

 


Click Learn More

Power Point EXL

     Don’t attempt to service or repair a conveyor without procedures for locking out power.

Never walk, ride, sit, or climb on a conveyor not intended for that purpose.

When working near conveyor, don’t wear loose clothing, jewelry, or other articles that might catch.

Do not operate any conveyor without thorough training
 in its use.


Don’t overload conveying equipment.

To avoid slips, be sure all work areas are clean and grease free.

Keep all body parts away from moving parts of conveyors.

Do not operate any conveyor unless all safety guards, covers, and maintenance panels are in place.

                                                   “ REMEMBER LET GO ’’   See Presentation to left

 

What the Law requires
The Occupational Health Safety and Welfare Act 1986 places an obligation of a "general duty of care" by an employer to its employees.
"General duty of care" includes the observance of approved codes of practice,

The guards must actually make access to the nip point physically impossible
This means that people shouldn’t be able to put their hands or fingers (depending on clearance) through it, put their arms around, over or under
it, or lean over it to reach the dangerous part of the conveyor (even if they try!). Remember, hand rails are not guards!

 

People will sometimes try to reach through, o v e r,  around or under guards to avoid stopping
the belt for a quick job. If you see an employee doing this

 Stop Him & Don't do it your self

 Set the Example of safety for all when it comes to Conveyor safety

 

                         

 

 

Battery Safety

Category: Maintenance

Mine Type: All Mines

Battery powered equipment is commonplace in modern mining operations. Battery power often has many advantages over other types of power for mining equipment.In recent years, several hundred accidents have occurred where miners were blinded or

seriously burned by batteries. Many of these accidents were related to charging, installing,

removing, or maintaining batteries.

MSHA believes these types of accidents are preventable. In addition, miners can be protected from needless serious injury if they wear personal protective equipment (PPE),such as chemical resistant rubber gloves, aprons and face shields.

Batteries contain acid and can explode and/or catch on fire. In the event of a battery explosion

or fire, acid and toxic fumes are released. When acid contacts the skin, extremely painful burns and scarring result. When breathed, the lungs are burnt from the toxic chemicals present in fumes. Blindness will likely result if this

acid contacts the eye. These physical injuries are irreversible. Therefore, when working with batteries,

it is important to prevent exposure by wearing
PPE.

When batteries are being charged, explosive

gasses are produced. Heat and sparks can ignite

these gasses causing a fire or explosion. All smoking,

open flames and spark producing items such

as grinders, welders or other electrical equipment,

should be kept well clear of batteries.

Surface leakage is a condition caused when dust mixes with spilled electrolyte on the battery,

creating a low resistance path. This low resistance path can “short” the battery. A shorted

battery creates heat that can potentially cause a fire. Batteries should be kept relatively clean

and free of excess dust to ensure against shorting.

Accidents and injuries involving batteries are avoidable.

DO your part!!Conveyer Danger,Danger Climbing, sitting, walking or riding on conveyor at any time will cause severe injury or death,
Determining the safe viewing distance of a sign depends upon many factors: •lighting, •background, •type font and visual acuity.Cranes, Derricks, Hoists, Elevators, and Conveyors CONVEYORS